Soft priming paste series
aNet yarn: 100-180 mesh
b superheat conditions: superheat 130-150 ℃ * 2 minutes
Printing process: printing → low-temperature drying (natural dry) → over baking channel 130-150 ℃ * 2 minutes → completely dry after placing 4 hours to test the best results
MATTERS NEEDING ATTENTION
When using this product for toning surface printing, it must be used together.
If you need to add auxiliaries before printing, you need to conduct a small test experiment in advance to make sure that the amount added cannot exceed 1%.
After adding auxiliaries to CG-05D, it is forbidden to mix the slurry with auxiliaries into the original packaging barrel.
PRINTING SAMPLE TEST
|Test Items||05D||Testing Method|
|Transparency||Very good||visual inspection|
|Softness||●●●●●||Internal standards: Level 5: super soft / Level 4: softer / Level 3: soft / Level 2: average / Level 1: hard|
|High elasticity||●●●●●||Internal standard: Grade 5:very good / Grade 4:good / Grade 3:fair / Grade 2:poor / Grade 1:very poor|
|Internal standard: Grade 5:Very good / Grade 4:Very good / Grade 3:Good / Grade 2:Fair / Grade 1:Poor|
|Machine wash fastness||pass||8g Eagles phosphate-free laundry detergent, 60 ℃ water temperature * 90min / time wash 5 times|
|Cold resistance||pass||Standard temperature -25℃ freezing for 24h|
Scan and download enterprise brochures on WeChat