PU windbreaker bottoming paste
aNet yarn: 100-180 mesh
b superheat conditions: superheat 130-150 ℃ * 2 minutes
Printing process: printing → low-temperature drying (natural dry) → over baking channel 130-150 ℃ * 2 minutes → completely dry after placing 4 hours to test the best results
MATTERS NEEDING ATTENTION
When using this product for toning surface printing, it must be used in conjunction.
This product must be used with additives, the amount of additives in the 2-4%, need to carry out a small test experiment in advance to determine the best amount.
After adding additives to CG-272, it is prohibited to mix the slurry with additives into the original packaging barrel.
PRINTING SAMPLE TEST
|Test Items||272||Testing Method|
|Transparency||Very good||visual inspection|
|Softness||●●●●●||Internal standards: Level 5: super soft / Level 4: softer / Level 3: soft / Level 2: average / Level 1: hard|
|High elasticity||●●●●●||Internal standard: Grade 5:very good / Grade 4:good / Grade 3:fair / Grade 2:poor / Grade 1:very poor|
|Internal standard: Grade 5:Very good / Grade 4:Very good / Grade 3:Good / Grade 2:Fair / Grade 1:Poor|
|Machine wash fastness||pass||8g Eagles phosphate-free laundry detergent, 60 ℃ water temperature * 90min / time wash 5 times|
|Cold resistance||pass||Standard temperature -25℃ freezing for 24h|
Scan and download enterprise brochures on WeChat