
Services:0760-88209336
Soft anti-freeze and anti-sublimation pulp
PRINTING CONDITIONS
aMesh: 100-180 mesh
b superheat conditions: superheat 130-150 ℃ * 2 minutes
Printing process: printing → low temperature drying (natural dry) → over baking channel 130-150 ℃ * 2 minutes → completely dry after placing 4 hours to test the best results
MATTERS NEEDING ATTENTION
If you need to add auxiliaries before printing, you need to conduct a small test experiment in advance to determine the amount of additive can not exceed 0.5%. after CG-2501 additive, it is forbidden to mix the slurry with additives into the original packaging barrel.
PRINTING SAMPLE TEST
Test Items | 2501 | Testing Method |
Covering power | ●●●●● | Internal standards: Level 5: very good / Level 4: very good / Level 3: good / Level 2: fair / Level 1: poor |
Softness | ●●●●● | Internal standards: Level 5: super soft / Level 4: softer / Level 3: soft / Level 2: average / Level 1: hard |
Machine wash fastness | pass | 8g Eagles phosphate-free laundry detergent, 60 ℃ water temperature * 95min / time, wash 5 times |
Cold resistance | - | Standard temperature -22℃ freezing for 24h |
Contact Us
Address:Building1,Zone1,Shenzhong Science and Technology Park,Sixth Industrial Zone ,Nanlang Town ,Zhongshan City,Guangdong
Company Tel:+86-0760-88209336
Company Fax:+86-0760-88665833

Scan Inquiry

Scan and download enterprise brochures on WeChat