Stone Ground Cowboy Pulp
aMesh: 100-180 mesh
b superheat conditions: superheat 130-150 ℃ * 2 minutes
Printing process: printing → low temperature drying (natural dry) → over baking channel 130-150 ℃ * 2 minutes → completely dry after placing 4 hours to test the best results
MATTERS NEEDING ATTENTION
The total amount of color paste should not exceed 10% (ordinary colors are more likely to lead to migration and discoloration of the color paste, it is recommended to use high temperature resistant, migration resistant colors are better)
When using this product for color mixing surface printing, it must be used together.
This product must be used with additives, the amount of additives in 2%, need to carry out a small test experiment in advance to determine the best amount.
CG-811/812 add auxiliaries, it is forbidden to mix the slurry with auxiliaries into the original packaging barrel.
PRINTING SAMPLE TEST
|Test Items||811||812||Testing Method|
|Covering power||●●●●●||●●●●●||Internal standards: Level 5: very good / Level 4: very good / Level 3: good / Level 2: fair / Level 1: poor|
|Softness||●●●●●||●●●●●||Internal standards: Level 5: super soft / Level 4: softer / Level 3: soft / Level 2: average / Level 1: hard|
|High elasticity||●●●●●||●●●●●||Internal standards: Level 5: very good / Level 4: very good / Level 3: good / Level 2: fair / Level 1: poor|
|Color fastness to dry rubbing||Level 4.5||Level 4.5||GB-3920-2008,10 cycles of friction|
|Color fastness to wet rubbing||Level 4||Level 4||GB-3920-2008,10 cycles of friction|
|Machine wash fastness||pass||pass||8g Eagles phosphate-free laundry detergent, 60 ℃ water temperature * 95min / time, wash 5 times|
|Anti-viscosity||No adhesion and no breakage on the surface of the print||No adhesion and no breakage on the surface of the print||Print not like folded, 70 ℃ temperature * 95 ℃ humidity, 5kg weight 24h, room temperature cooling tear|
|Cold resistance||Pass||Pass||Standard temperature -22℃ freezing for 24h|
Scan and download enterprise brochures on WeChat