Soft and thick slurry
aMesh: 100-180 mesh
b superheat conditions: superheat 130-150 ℃ * 2 minutes
Printing process: printing → low temperature drying (natural dry) → over baking channel 130-150 ℃ * 2 minutes → completely dry after placing 4 hours to test the best results
MATTERS NEEDING ATTENTION
If you need to add additives before printing, you need to conduct a small test experiment in advance to determine the amount of additive can not exceed 0.5%.
CG-301M additive, it is prohibited to add additives to the slurry mixed into the original packaging barrel.
PRINTING SAMPLE TEST
|Test Items||301M||Testing Method|
|Transparency||Very good||visual inspection|
|Softness||●●●●●||Internal standards: Level 5: super soft / Level 4: softer / Level 3: soft / Level 2: average / Level 1: hard|
|Starting thickness||Very good||visual inspection|
|Machine wash fastness||pass||8g Eagles phosphate-free laundry detergent, 60 ℃ water temperature * 90min / time wash 5 times|
|Cold resistance||-||Standard temperature -22℃ freezing for 24h|
Scan and download enterprise brochures on WeChat