Services：0760-88209336
Perfect solution for poor fastness of thick board pulp garment printing
- Categories:News
- Author:
- Origin:
- Time of issue:2021-11-12
- Views:0
(Summary description)The fabric may contain polyester components, or the fabric is smooth, and the thick board pulp for printing cotton is used instead of nylon thick board pulp. Use nylon thick board pulp need to add 1-1.5 curing agent
Perfect solution for poor fastness of thick board pulp garment printing
The fabric may contain polyester components, or the fabric is smooth, and the thick board pulp for printing cotton is used instead of nylon thick board pulp. Use nylon thick board pulp need to add 1-1.5 curing agent
Perfect solution for poor fastness of thick board pulp garment printing
(Summary description)The fabric may contain polyester components, or the fabric is smooth, and the thick board pulp for printing cotton is used instead of nylon thick board pulp. Use nylon thick board pulp need to add 1-1.5 curing agent
- Categories:News
- Author:
- Origin:
- Time of issue:2021-11-12
- Views:0
Thick board pulp garment printing, some will respond that the fastness is not good, washing will fall, summarizing roughly 6 possibilities.
1. The fabric may contain polyester components, or fabric is relatively smooth, with the printing of cotton thick board pulp, and did not use nylon thick board pulp. Use nylon thick board pulp need to add 1-1.5 curing agent.
2. Fabric hair is too much too long, it is recommended to use transparent pulp first priming, the first knife force printing (choose hard oil scraper better), can be transparent after priming with a good iron wrapped flat cloth hair.
3. The weather is humid, the pulp is not fully dry, can also lead to thick board pulp printing fastness is not good, the pulp off, can wait for the pulp surface dry, the reverse side overheating 140 ° 1-2 minutes.
4. color pulp added more than 10%, can increase the amount of transparent pulp.
5. The surface of the pulp layer is not dry that start high temperature baking, generally need pulp layer natural dry about 8 layers before baking (the pulp layer is not dry that start baking easy to cause blistering, so that the separation between the pulp layer and the pulp layer)
6. The above 5 conditions do not exist, the firmness is still not reached, you can add 1-2% of the curing agent, can make the firmness of 1 times, the curing agent can not add more, more will lead to the pulp brittle fracture. Paste natural dry and then baked in the oven at 140 degrees for 1 minute
Scan the QR code to read on your phone
Related News
Contact Us
Address:Building1,Zone1,Shenzhong Science and Technology Park,Sixth Industrial Zone ,Nanlang Town ,Zhongshan City,Guangdong
Company Tel：+86-0760-88209336
Company Fax：+86-0760-88665833
Scan Inquiry
Scan and download enterprise brochures on WeChat
